Charges 12V & 24V batteries.
Fully automatic from charge to maintenance.
Charges WET/Flooded, GEL, AGM, MF, VRLA type lead-acid rechargeable batteries.
Learn moreSandby feature of the charger monitors current drawn by battery.
There is no risk of over-charging.
The charger will not begin operation upon connection to the battery unless charging mode has been selected
It has 12 stage charging strategy-Pulse charge, 25
Provides ten output options to meet numerous requirements i.e. 28.8V, 29.4V, 14.4V 14.7V, 16V/Calcium, 14.4V/Night, 16V/Boost, 32V/Boost, 13.6V/Manual, and 13.6V/Supply.
Automatically diagnoses, recovers, charges & maintains batteries for months
Learn morePower of output current is unaffected with fluctuation of AC line voltage.
Learn moreThe charger is protected by NTC control. Reduce output power when it is too hot.
Learn moreHaving a temperature sensor to monitor the temperature of the battery and adjust the charging voltage.
Learn more
Provided with unique snap-lock, easily connectable, waterproof extendable connectors
Learn more
The XB2 processor is a smart processor which makes the charger faster, powerful, reliable and smarter.
Learn more1) Diagnosis & Recovery
Initializes the recovery process for drained batteries by pulse charging with high & low current in order to restoring the battery capacity.
2) Bulk
80% of energy is returned in this phase of charging. Here charger performs in two states: High Rate Charging and Medium Rate Charging.
3) Absorption
In this phase complete charging up to almost 100% is achieved. Charger switches to trickle charge phase after sensing that the battery is truly fully charged.
4) Analysis
After absorption phase, charger analyses condition of battery for 5 minutes to confirm the battery whether can retain charge or not. Battery that cannot retain charge with warning indication by flashing of “ FAL ” on digital display.
5) Trickle Charge
Battery is fully charged and ready to use. If the battery needs more current, the charger will switch to Maintenance Charge phase.
Standby feature
When battery remains connected with vehicle’s wiring system, during the trickle mode, circuits continuously monitor the current drawn by the battery.
6) Maintenance Charge
As charger continuously monitors the terminal voltage in order to determine if a maintenance charging should be initiated. If the battery is loaded and/or terminal voltage falls below 12.8V (for 12V battery) or 25.6V (for 24V battery), the charger starts a maintenance cycle until voltage reaches to 14.4V (for 12V battery) , 16V (for 12V Lead-Calcium battery) or 28.8V (for 24V battery). The maintenance charging is discontinued.
The 20655 deluxe clamps & Anderson Connector works with BENTON BX-5 battery chargers and allows the battery chargers to connect quickly between different batteries. ..
Read more
The 20656 Eyelets Cord with Anderson Connector works with BENTON BX-5 battery chargers. It can be used for permanent attachment to the battery posts to allow quick connection/disconnection through snap-connector.
.. Read more