BENTON BX-2 is a smart, 7-step fully automatic switch mode battery charger and maintainer, designed for charging a variety of 12V and 24V lead-acid rechargeable batteries, widely used in motorcycle, cars, boats, ATVs, trucks, golf carts, tractors, RVs and Snowmobiles. The batteries may be of various types i.e. WET/Flooded, GEL, AGM, MF, VRLA batteries capacity from 12V/14Ah to 12V/230Ah and 24V/14Ah to 24V/120Ah. The BX-2 also charges batteries in cold conditions, recovers slightly sulfated batteries and rescues drained battery. It provides trickle charge and maintenance charging which increase battery life and gives superb performance.
A versatile BX-2 smart battery charger comes with Boost charges, Maintenance, Power Supply and memory function.
Charges 12V & 24V batteries.
Fully automatic from charge to maintenance.
Charges WET/Flooded, GEL, AGM, MF, VRLA type lead-acid rechargeable batteries.Learn more
Sandby feature of the charger monitors current drawn by battery.
There is no risk of over-charging.
The charger will not begin operation upon connection to the battery unless charging mode has been selected
Automatically diagnoses, recovers, charges & maintains batteries for monthsLearn more
Power of output current is unaffected with fluctuation of AC line voltage.Learn more
Two times faster than standard chargers in charging.Learn more
High frequency with smaller size and greater efficiency.Learn more
Returns to last selected Mode when restarted.Learn more
Rescues deep discharged and sulfated batteries to increases batteries life.Learn more
Protection against short circuit & wrong connections.Learn more
The charger is protected by NTC control. Reduce output power when it is too hot.Learn more
suitable for charging battery in cold weather and charging AGM batteries.
Use as 12V power supply or use for maintenance charging.Learn more
Recover severe discharged or sulfated batteries.Learn more
Provided with unique snap-lock, easily connectable, waterproof extendable connectorsLearn more
The XB2 processor is a smart processor which makes the charger faster, powerful, reliable and smarter.Learn more
1) Diagnosis & Recovery
Initializes the recovery process for drained batteries by pulse charging with small current in order to restoring the battery capacity.
80% of energy is returned in this phase of charging. Here charger performs in two states: High Rate Charging and Medium Rate Charging.
In this phase complete charging up to almost 100% is achieved. Charger switches to trickle charge phase after sensing that the battery is truly fully charged.
4) Trickle Charge
Battery is fully charged and ready to use. If the battery needs more current, the charger will switch to Maintenance Charge phase.
When battery remains connected with vehicle’s wiring system, during the trickle mode, circuits continuously monitor the current drawn by the battery.
BENTON® BX-2 is fully interactive charger which adjusts itself to changing current and voltage requirement to charge and maintain the battery.
5) Maintenance Charge
As charger continuously monitors the terminal voltage in order to determine if a maintenance charging should be initiated. If the battery is loaded and/or terminal voltage falls below 12.8V (for 12V battery) or 25.6V (for 24V battery), the charger starts a maintenance cycle until voltage reaches to 14.4V (for 12V battery) or 28.8V (for 24V battery). The maintenance charging is discontinued.
6) Supply 13.6V
BENTON® BX-2 charger provides a constant voltage at 13.6V and current up to 5.0A. This is suitable for maintenance of 12V battery using Float charge approach at 100% of charge. It is also used as a power supply with maximum capacity of 13.6V/5A
7) Boost 16V
To recover severely discharged 12V batteries this mode is useful. High voltage (17V max) at 1.5A is applied for a maximum period of 3 hours. At finish of this stage it would switch to normal charging setting (14.4V).
The 67587 Deluxe Ring Terminal Connector for use with multiple batteries. It contains a 10 amp blade fuse and 6.3mm diameter of eyelet for permanent attachment to the battery posts to allow quick connection/disconnection through snap-connector...Read more
The 69448 Deluxe Clamps Connector works with BENTON battery chargers and allows the battery chargers to connect quickly between different batteries ..Read more
The 69457 12V BMW Cigarette lighter Adapter with Connector allows easy connection of BENTON chargers to a standard car cigarette lighter receptacle or a motorcycle’s accessory socket. It also plugs into the female DIN Socket accessory. Protect with 8A glass fuse. ..Read more
The 20663 12V Cigarette Lighter Plug with Connector works with BENTON battery chargers and allows the battery chargers to charge and maintain the battery through the vehicle’s 12V socket. ..Read more
The 20247 12V Cigarette Lighter Adapter is used in standard car cigarette lighter receptacle or a motorcycle’s accessory socket. It also can be plugged into the female DIN Socket accessory. Protect with 8A glass fuse. ..Read more
The 6931 Deluxe Clamps Set for use with multiple batteries and quick contact battery leads with clamps. ..Read more
The 20657 12V Female Cigarette Adapter can be used with the BENTON BX-2 battery charger in 13.6V Power Supply Mode. It enables the use of 12V dc accessories, like air pumps, cell phone chargers and cooler/..Read more